ASTM C841-03(2018)
Standard Specification for Installation of Interior Lathing and Furring
- Standard No.
- ASTM C841-03(2018)
- Release Date
- 2018
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM C841-23
- Latest
- ASTM C841-23
- Scope
- 1.1 This specification covers the minimum requirements for, and the methods of application of, interior lathing and furring to receive gypsum plaster applied in accordance with Specification C842. Other materials are not prohibited from being used provided that their physical characteristics and durability under conditions of usage are at least equal in performance to those described. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.4 Where a specific degree of sound control is required for plastered assemblies and constructions, details of construction shall be obtained from reports of sound tests of assemblies that have met the requirements of Test Method E492. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C841-03(2018) Referenced Document
- ASTM A641/A641M Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM C1002 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs*， 2022-06-01 Update
- ASTM C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories*， 2020-05-01 Update
- ASTM C1032 Standard Specification for Woven Wire Plaster Base
- ASTM C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- ASTM C37/C37M Standard Specification for Gypsum Lath
- ASTM C514 Standard Specification for Nails for the Application of Gypsum Board
- ASTM C754 Standard Specification for Installation Of Steel Framing Members To Receive Screw-Attached Gypsum Wallboard, Backing Board, Or Water-Resistant Backing Board
- ASTM C842 Standard Specification for Application of Interior Gypsum Plaster
- ASTM C847 Standard Specification for Metal Lath
- ASTM C933 Standard Specification for Welded Wire Lath
- ASTM C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness*， 2022-06-01 Update
- ASTM D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- ASTM D3678 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
- ASTM E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
ASTM C841-03(2018) history
- 2023 ASTM C841-23 Standard Specification for Installation of Interior Lathing and Furring
- 2018 ASTM C841-03(2018) Standard Specification for Installation of Interior Lathing and Furring
- 2003 ASTM C841-03(2013) Standard Specification for Installation of Interior Lathing and Furring
- 2003 ASTM C841-03(2008)e1 Standard Specification for Installation of Interior Lathing and Furring
- 2003 ASTM C841-03 Standard Specification for Installation of Interior Lathing and Furring
- 1999 ASTM C841-99 Standard Specification for Installation of Interior Lathing and Furring
