ASTM D130-19
Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

Standard No.

ASTM D130-19

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D130-19

Scope

1.1 This test method covers the determination of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8 °C. (Warning—Some products, particularly natural gasoline, may have a much higher vapor pressure than would normally be characteristic of automotive or aviation gasolines. For this reason, exercise extreme caution to ensure that the pressure vessel used in this test method and containing natural gasoline or other products of high vapor pressure is not placed in the 100 °C (212 °F) bath. Samples having vapor pressures in excess of 124 kPa (18 psi) may develop sufficient pressures at 100 °C to rupture the pressure vessel. For any sample having a vapor pressure above 124 kPa (18 psi), use Test Method D1838.) 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 1.1, 7.1, and Annex A2. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D130-19 Referenced Document

• ASTM D1655 Standard Specification for Aviation Turbine Fuels
• ASTM D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
• ASTM D396 Standard Specification for Fuel Oils
• ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
• ASTM D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
• ASTM D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
• ASTM D975 Standard Specification for Diesel Fuel Oils
• ASTM E1 Standard Specification for ASTM Thermometers

ASTM D130-19 history

• 2019 ASTM D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
• 2018 ASTM D130-18 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
• 2012 ASTM D130-12 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
• 2010 ASTM D130-10 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
• 2004 ASTM D130-04e1 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
• 2004 ASTM D130-04 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
• 2000 ASTM D130-94(2000)e1 Standard Test Method for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test