IEEE - The Institute of Electrical and Electronics Engineers@ Inc.
Latest
IEEE C57.16-2011
Scope
This standard applies to series-connected dry-type air-core single-phase and three-phase outdoor or indoor reactors of distribution and transmission voltage class that are connected in the power system to control power flow under steady-state conditions and/or limit fault current under short-circuit conditions. Dry-type air-core reactors covered by this standard are self-cooled by natural air convection. With some restrictions@ this standard is applicable to filter reactors@ shunt capacitor reactors (used with shunt capacitor banks)@ and discharge current-limiting reactors (used with series capacitor banks). Annex A@ Annex B@ and Annex C are included to provide guidance. This standard does not apply to devices such as a) Shunt reactors (see IEEE Std C57.21?-2008)1 b) Arc suppression coils c) Neutral grounding devices (see IEEE Std 32?-1972 [B21])2 d) Line resonant reactors e) High-voltage direct current (HVDC) smoothing reactors (IEEE Std 1277?-2010 [B23]) f) Forced cooled reactorsg) Line traps and radio interference (RI) filter reactors (ANSI C93.3-1995) Purpose The purpose of this standard is to define the requirements and test code for series-connected dry-type aircore reactors and@ with some restrictions@ filter reactors@ shunt capacitor reactors@ and discharge currentlimiting reactors. 1 Information on references can be found in Clause 2. 2 Numbers in brackets correspond to the numbers in the bibliography in Annex G.
IEEE C57.16-2011 history
2011IEEE C57.16-2011 Requirements@ Terminology@ and Test Code for Dry-Type Air-Core Series-Connected Reactors
1996IEEE C57.16-1996 Standard Requirements@ Terminology@ and Test Code for Dry-Type Air-Core Series-Connected Reactors (Revision of ANSI C57.16-1958)
1958IEEE C57.16-1958 REQUIREMENTS@ TERMINOLOGY@ AND TEST CODE FOR CURRENT - LIMITING REACTORS