IEEE 1613-2023
IEEE Standard for Environmental and Testing Requirements for Devices with Communications Functions used with Electric Power Apparatus

Standard No.

IEEE 1613-2023

Release Date

2024

Published By

Institute of Electrical and Electronics Engineers (IEEE)

Latest

IEEE 1613-2023

Scope

This standard specifies the rated values and operating conditions, environmental performance and test requirements for devices with communication functions for power equipment. It describes the environmental conditions and electromagnetic compatibility (EMC) immunity levels and simulated environmental tests related to power equipment. It provides acceptance criteria for evaluating the functionality of equipment. For equipment used in power equipment and having communication ports (fiber optic ports, copper wire ports [such as Ethernet, Ethernet power supply, serial, carrier current communication interface], antenna ports, etc.), if the equipment does not perform protection or control functions, the testing of communication functions is covered by IEEE Std 1613. If the equipment performs protection or control functions and has communication ports, the testing of all communication functions is covered by the IEEE C37.90 series of standards. The purpose of this standard is to define the environmental and EMC conditions required for the design and evaluation of equipment with communication functions for power equipment to establish a common and reproducible basis. This standard applies only to the use of finished equipment or fully assembled equipment in its intended use.

IEEE 1613-2023 Referenced Document

• IEC 60255-1:2009 Measuring relays and protection equipment - Part 1: Common requirements
• IEC 60255-21-1:1988 Electrical relays; part 21: vibration, shock, bump and seismic tests on measuring relays and protection equipment; section one: vibration tests (sinusoidal)
• IEC 60255-21-2:1988 Electrical relays; part 21: vibration, shock, bump and seismic tests on measuring relays and protection equipment; section two: shock and bump tests
• IEC 60255-21-3:1993 Electrical relays; part 21: vibration, shock, bump and seismic tests on measuring relays and protection equipment; section 3: seismic tests
• IEC 60255-26:2013 Measuring relays and protection equipment.Part 26: Electromagnetic compatibility requirements
• IEC 60255-27:2013 Measuring relays and protection equipment - Part 27: Product safety requirements
• IEC 61000-4-10:2016 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
• IEC 61000-4-11:2020/COR1:2020 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16
• IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
• IEC 61000-4-18:2019/COR1:2019 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
• IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
• IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measuring techniques - Electrostatic discharge immunity test
• IEC 61000-4-3:2020 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
• IEC 61000-4-4:2012 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
• IEC 61000-4-5:2014/AMD1:2017 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
• IEC 61000-4-6:2013/COR1:2015 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields; Corrigendum 1
• IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
• IEEE Std C37.90-2005 Relays and relay systems associated with electric power apparatus
• IEEE Std C37.90.1-2012 Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

IEEE 1613-2023 history

• 2024 IEEE 1613-2023 IEEE Standard for Environmental and Testing Requirements for Devices with Communications Functions used with Electric Power Apparatus
• 2010 IEEE 1613/INT 1-2010 Environmental and Testing Requirements for Communications Networking Devices Installed in Electrical Power Substations
• 2009 IEEE 1613-2009 Environmental and testing requirements for communications networking devices installed in electric power substations
• 2008 IEEE 1613/INT 1-2008 IEEE Standards Interpretation for IEEE Std 1613™ -2003 IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations
• 2006 IEEE 1613/COR 1-2006 Environmental and testing requirements for communications networking devices in electric power substations; Corrigendum 1
• 2003 IEEE 1613-2003 Environmental and testing requirements for communications networking devices in electric power substations

Standard and Specification