SY/T 10042-2002
Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems (English Version)
- Standard No.
- SY/T 10042-2002
- Language
- Chinese, Available in English version
- Release Date
- 2002
- Published By
- Professional Standard - Petroleum
- Latest
- SY/T 10042-2002
- Scope
- This recommended practice recommends minimum requirements and guidelines for the design and installation of new piping systems on offshore production platforms. The maximum design pressure in this article is 70,000kPa (10,000 psi), and the temperature range is -29°C (-20^(°)F) to 343°C (650^(°)F). For applications outside this pressure and temperature range, special consideration should be given to material properties (such as ductility, carburization, etc.). This recommended practice is based on many years of experience in developing oil and gas mines. Virtually all of this offshore experience has been used in hydrogen sulfide-free hydrocarbon operations. However, the recommended practices, which are based on extensive land-based experience, also cover certain aspects of hydrocarbon operations containing hydrogen sulfide. a) This recommended practice includes general and specific requirements for topsides piping systems that are not specified in API Spec 6A. Chapters 2, 3, and 4 are general requirements for the design and application of piping, valves, and fittings for typical process flows. Chapters 6 and 7 are general requirements for installation, quality control, and matters related to typical process piping systems, such as insulation. Chapter 5 contains specific requirements for the design of special piping systems, including piping systems that differ from the recommended practices in the general chapters. b) Carbon steel materials are suitable for most production platform piping systems. At least one of the recommended carbon steel materials is the most commonly used. Other materials that may be suitable for platform piping systems are not included because they are not generally used. When selecting materials other than this recommended practice, the following aspects should be considered: (1) Type of work. (2) Compatibility with other materials. (3) Extensibility. (4) Requirements for special welding procedures. (5)Special inspection, testing or quality control requirements. (6) Possible misuse on site. (7) Corrosion and erosion caused by internal fluids and/or marine environment.
SY/T 10042-2002 history
- 2002 SY/T 10042-2002 Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems
