SAE AMS5905C-2018 PDF

Scope: Form This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005 inch (0.13 mm) in nominal thickness (see 8.6). Application These products have been used typically in aircraft structural components requiring moderate forming and bending during fabrication and where corrosion resistance up to 800 ??(427 ?? is required@ but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore@ the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before@ during@ or after fabrication.

SAE AMS5905C-2018 history

2024 SAE AMS5905D-2024 Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
2018 SAE AMS5905C-2018 Steel@ Corrosion-Resistant@ Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled@ 3/4 Hard@ 175 ksi (1207 MPa) Tensile Strength (UNS S30200)
2012 SAE AMS5905B-2012 Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
2006 SAE AMS5905B-2006 Steel, Corrosion Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength UNS S30200
2000 SAE AMS5905A-2000 Steel, Corrosion Resistant, Sheet and Strip 18Cr 9.0Ni Cold Rolled, 3/4/ Hard, 175 ksi (1207 MPa) Tensile Strength
2000 SAE AMS5905-2000 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 175 ksi (1207 MPa) Tensile Strength
1992 SAE AMS5905-1992 Steel Sheet and Strip@ Corrosion Resistant 18Cr - 9.0Ni (SAE 30302) Cold Rolled@ 175 ksi (1207 MPa) Tensile Strength (UNS S30200)