International Organization for Standardization (ISO)
Latest
ISO 2929:2021
Scope
This document specifies the requirements for two groups of rubber hoses and rubber hose assemblies for loading and discharge of liquid hydrocarbon fuels with a maximum working pressure of 1,0 MPa (10 bar).
Both groups of hoses are designed for a) use with hydrocarbon fuels having an aromatic-hydrocarbon content not exceeding 50 % by volume and containing up to 15 % of oxygenated compounds, and b) operation within the temperature range of −30 °C to +70 °C, undamaged by climatic conditions of −50 °C to +70 °C when stored in static conditions.
NOTE Hoses for use at temperatures lower than −30 °C can be the subject of discussion between manufacturer and end user.
This document is not applicable to hoses and hose assemblies for LPG systems, aviation fuel systems, fuel station systems or marine applications.
ISO 2929:2021 Referenced Document
ISO 10619-1 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness- Part 1:Bending tests at ambient temperature
ISO 10619-2 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 1817:2015 "Rubber, vulcanized or thermoplastic - Determination of the effect of liquids"
ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests*, 2023-03-09 Update
ISO 37 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 4649:2017 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
ISO 4671 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies*, 2022-03-21 Update
ISO 7233 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
ISO 8031 Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
ISO 8033 Rubber and plastics hoses - Determination of adhesion between components
ISO 8330 Rubber and plastics hoses and hose assemblies — Vocabulary*, 2022-03-28 Update
ISO 2929:2021 history
2021ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
2014ISO 2929:2014 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
2002ISO 2929:2002 Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
1991ISO 2929:1991 Rubber hoses for bulk fuel truck delivery; specification
1975ISO 2929:1975 Rubber hose for fuel truck delivery