This part of GB/T 34590 specifies the requirements for vehicle product development at the hardware level, including: ——requirements for initiating product development at the hardware level; ——definition of hardware safety requirements; ——hardware design; ——hardware architecture measurement; and — evaluation of violations of safety goals due to random hardware failures, hardware integration and testing. The requirements of this section for hardware elements apply to non-programmable elements and programmable elements, such as ASIC, FPGA and PLD. And, /—, /— the requirements of chapters and chapters for programmable electronic elements are applicable. GB/T 34590.6-2017, GB/T 34590.8-2017 11 12 This standard applies to safety-related systems including one or more electrical and electronic systems installed on mass-produced passenger vehicles. This standard does not apply to specific electrical and electronic systems on special purpose vehicles, for example, vehicles designed for disabled drivers. This standard does not apply to systems and their components that have been released for production or that were developed prior to the publication date of this standard. When further development or changes are made to the system and its components that have been released for production before the release of this standard, only the modified part needs to be developed in accordance with this standard. This standard addresses the possible hazards caused by the faulty behavior of electrical and electronic safety-related systems, including the possible hazards caused by the interaction of these systems. This standard does not address hazards related to electric shock, fire, smoke, heat, radiation, toxicity, flammability, reactivity, corrosion, energy release, etc. and similar hazards, unless the hazard is directly caused by a failure of an electrical and electronic safety-related system caused by behavior. This standard does not address the nominal performance of electrical and electronic systems, even if these systems (for example, active and passive safety systems, braking systems, adaptive cruise systems) have dedicated functional performance standards.