UL 1682-2002
UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Second Edition)

Standard No.

UL 1682-2002

Release Date

2002

Published By

Underwriters Laboratories (UL)

Status

Be replaced 2007-08

Replace By

UL 1682 BULLETIN-2002

Latest

UL 1682-2022

Scope

This standard applies to pin and sleeve type plugs@ receptacles@ power inlets@ and connectors@ rated up to 800 amperes and up to 600 volts ac or dc@ and which may include two or fewer pilot contacts. These devices are intended to provide power from branch circuits@ or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC) and the National Electrical Code ANSVNFPA 70@ using copper conductors@ for use in either indoor or outdoor nonhazardous locations. In Canada@ the terminals of a device intended to accommodate aluminum conductors shall also comply with C22.2 No. 65 Wire Connectors. In the U.S. this standard does not apply to single conductor pin and sleeve devices. This standard does not apply to: ????? a) Devices molded integrally with flexible cord or cable that are covered by the Standard for Cord Sets and Power Supply Cords@ UL 817 and Cord Sets and Power Supply Cords@ CSA C22.2 No. 21; ????? b) General and special use devices@ such as attachment plugs@ receptacles@ cord connectors@ inlets@ current taps@ flatiron and appliance plugs@ that are covered by the Standard for Attachment Plugs and Receptacles@ UL 498 and General Use Receptacles@ Attachment Plugs@ and Similar Wiring Devices@ CSA C22.2 No. 42@ Appliance Plugs for Heater Cord Sets@ CSA C22.2 No. 57@ and Industrial Locking Type@ Special Use Attachment Plugs@ Receptacles@ and Connectors@ CSA C22.2 No. 182.2; ?????? c) Single and multi-pole connectors@ which may include 3 or more pilot contacts@ intended for connection to copper conductors@ for use in data@ signal@ control and power applications within and between electrical equipment@ where exposed@ that are covered by the Standard for Component Connectors for Use in Data@ Signal@ Control and Power Applications@ UL 1977 and Special Use Attachment Plugs@ Receptacles@ and Connectors@ CSA C22.2 No. 182.3; ?????? d) Devices intended for use in hazardous (Classified) locations that are covered by the Standard for Receptacle-Plug Combinations For Use in Hazardous (Classified) Locations@ UL I010 and Attachment Plugs@ Receptacles@ and Similar Wiring Devices for Use in Hazardous Locations: Class I@ A@ B@ C@ and D@ Class II@ Group G in Coal or Coke Dust@ and in Gaseous Mines@ CSA C22.2 No. 159; ?????? e) Products such as switched interlocks that are covered by the Standard for Industrial Control Equipment@ UL 508 and Industrial Control Equipment@ CSA C22.2 No. 14;

UL 1682-2002 history

• 1970 UL 1682-2022 UL Standard for Safety Plugs Receptacles and Cable Connectors of the Pin and Sleeve Type
• 2017 UL 1682-2017 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Fifth Edition)
• 2016 UL 1682 BULLETIN-2016 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: November 28@ 2016)
• 2015 UL 1682 BULLETIN-2015 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: December 16@ 2015)
• 2014 UL 1682 CRD-2014 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type - Section/Paragraph Reference: Para. 5.30.1@ 5.30.2 and 7.1.14.1 Subject: UL 1682 UL 50E Reference Update (Edition 4: October 04@ 2013)
• 2013 UL 1682 BULLETIN-2013 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: March 06@ 2013)
• 2013 UL 1682-2013 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Fourth Edition; Reprint with revisions through and including February 07@ 2014)
• 2012 UL 1682 BULLETIN-2012 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: May 21@ 2012)
• 2011 UL 1682 CRD-2011 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type - Section / Paragraph Reference: (New) Para. 2.2.1.1; 2.2.1.2; Sections 4.11.2; 5.31 through 5.37; 7.1.16 Subject: Attachment Plugs and Cord Connectors of the Pin &
• 2011 UL 1682 BULLETIN-2011 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (COMMENTS DUE: AUGUST 22@ 2011)
• 2007 UL 1682-2007 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Third Edition)
• 2006 UL 1682 BULLETINS-2006 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (10/13/2006 (70p); 04/20/2006 (68p))
• 2004 UL 1682 BULLETIN-2004 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
• 2003 UL 1682 BULLETINS-2003 2/17/2003 (12p)
• 2003 UL 1682 BULLETIN-2003 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
• 2002 UL 1682 BULLETINS-2002 1/31/2002 (12p)
• 2002 UL 1682 BULLETIN-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
• 2002 UL 1682-2002 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (Second Edition)
• 2001 UL 1682 BULLETINS-2001 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type (10/05/2001 (76p); 01/31/2001 (80p))
• 2001 UL 1682 BULLETIN-2001 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors of the Pin and Sleeve Type
• 1993 UL 1682-1993 UL Standard for Safety Plugs@ Receptacles@ and Cable Connectors@ of the Pin and Sleeve Type (First Edition; Reprint with Revisions Through and Including May 19@ 2000)