ASTM E2726/E2726M-12a(2017)
Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

Standard No.

ASTM E2726/E2726M-12a(2017)

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM E2726/E2726M-12a(2017)

Scope

1.1 This test method determines the fire-test-response characteristics of deck structures attached to or in close proximity to primary structures. The burning brand exposures test is intended to determine the degradation modes of decking materials when exposed to a burning brand on the upper surface of a deck structure. 1.2 The use of paints, coatings, stains, or other surface treatments for fire protection purposes are beyond the scope of this test method. This test method excludes the use of paints, stains, or coatings for this fire-test-response determination. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions. 1.5 Fire testing of products and materials is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E2726/E2726M-12a(2017) Referenced Document

• ASTM D2898 Standard Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
• ASTM D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards*， 2022-04-01 Update
• ASTM D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails*， 2021-11-01 Update
• ASTM E108 Standard Methods of Fire Tests Of Roof Coverings
• ASTM E176 Standard Terminology of Fire Standards
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials

ASTM E2726/E2726M-12a(2017) history

• 2017 ASTM E2726/E2726M-12a(2017) Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
• 2012 ASTM E2726/E2726M-12a Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
• 2012 ASTM E2726/E2726M-12 Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands