UNE-EN 61753-091-2:2013
Specification for the operation of optical fiber connecting devices and passive components Part 091-2: Single-mode optical fiber unterminated directional couplers (category C) Controlled environment
- Standard No.
- UNE-EN 61753-091-2:2013
- Release Date
- 2013
- Published By
- Spanish Association for Standardization (UNE) ES / UNE
- Latest
- UNE-EN 61753-091-2:2013
- Scope
- This part of IEC 61753 contains the minimum test and measurement requirements and rigor that fiber optic circulators should meet in order to be classified according to the requirements for use in controlled environments specified in IEC 61753-1. These requirements cover non-connectorized single-mode fiber-pigtailed circulators for use in controlled environments and are applicable to Category C.
UNE-EN 61753-091-2:2013 Referenced Document
- IEC 60793-2-50:2008 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
- IEC 61300-2-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
- IEC 61300-2-4 Amendment 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
- IEC 61300-2-9 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock
- IEC 61300-3-2 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device
- IEC 61300-3-7 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components
UNE-EN 61753-091-2:2013 history
- 2013 UNE-EN 61753-091-2:2013 Specification for the operation of optical fiber connecting devices and passive components Part 091-2: Single-mode optical fiber unterminated directional couplers (category C) Controlled environment
Standard and Specification
VDE 0885-314-1 E*DIN IEC 61314-1:2010-07 Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification
KS C IEC 62005-1:2007 Reliability of fibre optic interconnecting devices and passive components － Part 1: Introductory guide and definitions
VDE 0472-252-1985*DIN VDE 0472-252:1985 Testing of cables, wires and flexible cords; attenuation of optical fibres
JIS C 5900:2013 General rules of passive devices for fiber optic transmission
DIN EN 61754-1 E:2012-05 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
DIN EN 61755-3-11 E:2017-06 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-11: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - Non-angled cylindrical full zirconia ferrul...
IEC 61300-2-51:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode
DIN EN 61300-3-25 E:2014-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
DIN EN 61300-2-9 E:2015-07 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock