LST EN 60404-6-2004 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)
This document specifies methods for measuring the magnetic properties of soft magnetic metallic and powder materials using ring-shaped specimens within a frequency range of 20 Hz to 200 kHz. It provides detailed procedures for conducting tests, including the preparation of specimens, the setup of measurement equipment, and the conditions under which measurements should be carried out. The methods described are applicable to a wide range of materials and are intended to ensure consistency and accuracy in the measurement process. The document outlines the necessary parameters and variables to be considered during testing and includes guidelines for interpreting the results. It is designed to support the evaluation of magnetic characteristics under various operating conditions and to facilitate comparison between different materials. The procedures are applicable to both laboratory and industrial environments where precise measurement of magnetic properties is required.
*** Please note: This description may not be accurate, please refer to the official documentation.
LST EN 60404-6-2004 history
2004LST EN 60404-6-2004 Magnetic materials. Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)