IEC 60404-6:2003
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens

Standard No.

IEC 60404-6:2003

Release Date

2003

Published By

International Electrotechnical Commission (IEC)  IX  /  IEC

Status

Be replaced

Replace By

IEC 60404-6:2003/COR1:2009

Latest

IEC 60404-6:2021

Replace

IEC 68/271/FDIS:2003 IEC 60404-6:1986

Scope

Specifies methods for the measurement of a.c. magnetic properties of materials in the frequency range 20 Hz to 200 kHz other than electrical steels and soft ferrites. The materials covered by this part of IEC 60404 include those speciality alloys listed

IEC 60404-6:2003 history

• 2021 IEC 60404-6:2021 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
• 2021 IEC 60404-6:2018/AMD1:2021 Amendment 1 - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use
• 2018 IEC 60404-6:2018/COR1:2018 Magnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (Edition 3.0)
• 2009 IEC 60404-6:2003/COR1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens; Corrigendum 1
• 2003 IEC 60404-6:2003 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens
• 1986 IEC 60404-6:1986 Magnetic Materials Part 6: Methods of Measurement of the Magnetic Properties of Isotropic Nickel-Iron Soft Magnetic Alloys@ Types E1@ E3 and E4 (Edition 1.0)

Standard and Specification