EN ISO 13500:2008
Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008)

Standard No.

EN ISO 13500:2008

Release Date

2008

Published By

European Committee for Standardization (CEN)  IX  /  CEN

Status

Be replaced

Replace By

EN ISO 13500:2008/AC:2009

Latest

EN ISO 13500:2008/A1:2010

Replace

BS EN ISO 13500:2006

Scope

This International Standard covers physical properties and test procedures for materials manufactured for use in oil-and gas-well drilling fluids. The materials covered are barite; haematite; bentonite; nontreated bentonite; OCMA-grade bentonite; attapulgite; sepiolite; technical-grade low-viscosity carboxymethylcellulose (CMC-LVT); technical-grade high-viscosity carboxymethylcellulose (CMC-HVT); starch; low-viscosity polyanionic cellulose (PAC-LV); high-viscosity polyanionic cellulose (PAC-HV) and drilling-grade Xanthomonas campestris (Xanthan gum).This International Standard is intended for the use of manufacturers of named products.

EN ISO 13500:2008 Referenced Document

• ASTM D422 Standard Test Method for Particle-Size Analysis of Soils
• ASTM E11 Standard Specification for Wire Cloth and Sieves for Testing Purposes
• ASTM E161 Standard Specification for Precision Electroformed Sieves
• ASTM E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
• ASTM E77 Standard Test Method for Inspection and Verification of Thermometers
• ISO 10414-1:2008 Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
• ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances

EN ISO 13500:2008 history

• 2010 EN ISO 13500:2008/A1:2010 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests - Amendment 1: Barite 4,1 (ISO 13500:2008/AMD 1:2010)
• 2009 EN ISO 13500:2008/AC:2009 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008/Cor 1:2009)
• 2008 EN ISO 13500:2008 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008)
• 2006 EN ISO 13500:2006 Petroleum and Natural Gas Industries - Drilling Fluid Materials - Specifications and Tests
• 1998 EN ISO 13500:1998 Petroleum and Natural Gas Industries - Drilling Fluid Materials - Specifications and Tests ISO 13500:1998

EN ISO 13500:2008 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008) has been changed from BS EN ISO 13500:2006 Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests.

Standard and Specification