DIN EN ISO 9917-1:2024-03
Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO/DIS 9917-1:2024) German and English version prEN ISO 9917-1:2024 / Note: Date of issue 2024-02-09*Intended as replacement for DIN EN ISO 9917-1 (2008-01).

Standard No.
DIN EN ISO 9917-1:2024-03
Release Date
2024
Published By
German Institute for Standardization  DE  /  DIN
Status
Replace By
DIN EN ISO 9917-1:2025-11
Latest
DIN EN ISO 9917-1:2025-11
 

Introduction
A dental cement standard that specifies requirements for powder/liquid acid-base cements intended for restorative and prosthetic applications. The document outlines the composition, physical properties, setting time, mechanical strength, and biocompatibility criteria of these materials to ensure their effectiveness in clinical use. It is applicable to both German and English language versions.

DIN EN ISO 9917-1:2024-03 history

  • 2025 DIN EN ISO 9917-1:2025-11 Dentistry - Water-based cements - Part 1: Acid-base cements (ISO 9917-1:2025); German version EN ISO 9917-1:2025
  • 2024 DIN EN ISO 9917-1:2024-03 Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO/DIS 9917-1:2024) German and English version prEN ISO 9917-1:2024 / Note: Date of issue 2024-02-09*Intended as replacement for DIN EN ISO 9917-1 (2008-01).
  • 2024 DIN EN ISO 9917-1:2024 Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO/DIS 9917-1:2024) German and English version prEN ISO 9917-1:2024
  • 2008 DIN EN ISO 9917-1:2008-01 Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO 9917-1:2007); German version EN ISO 9917-1:2007
  • 2004 DIN EN ISO 9917-1:2004-04 DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS

Standard and Specification

IEC 60641-3-2:1992 Specification for pressboard and presspaper for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1 IEC 60641-3-2:2008 Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 IEC 60641-3-2:2007 Specification for pressboard and presspaper for electrical purposes – Part 3: Specifications for individual materials – Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (Edition 2.0) IEC 60641-3-1:1992 Specification for pressboard and presspaper for electrical purposes; part 3: specifications for individual materials; sheet 1: requirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 KS C IEC 60641-3-1:2003 Specification for pressboard and presspaper for electrical purposes-Part 3:Specifications for individual materials-Sheet 1:Requirements for pressboard, typesB.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 CEI EN 60641-3-2:2010 Specification for pressboard and presspaper for electrical purposes Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 IS 16498-3-2-2019 Specification for Pressboard and Presspaper for Electrical Purposes Part 3 Specifications for Individual Materials —— Sheet 2 : Requirements for Presspaper, Types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 CEI EN 60641-3-2:1999 SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: REQUIREMENTS FOR PRESSPAPER, TYPES P.2.1, P.4.1, P.4.2, P.4.3 AND P.6.1 DS/EN 60641-1:2008 Specification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements GSO IEC 60641-2:2014 Pressboard and presspaper for electrical purposes - Part 2: Methods of tests



Copyright ©2026 All Rights Reserved
Update: Mon, 13 Jul 2026 17:24:45 +0000