DIN EN ISO 1183-1:2024-03
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024); German and English version prEN ISO 1183-1:2024 / Note: Date of issue 2024-01-26*In...

Standard No.

DIN EN ISO 1183-1:2024-03

Release Date

2024

Published By

German Institute for Standardization  DE  /  DIN

Status

Be replaced

Replace By

DIN EN ISO 1183-1:2025-09

Latest

DIN EN ISO 1183-1:2025-09

Introduction

This standard specifies methods for determining the density of non-cellular plastics. It consists of three parts: the immersion method, the pycnometer method, and the titration method. These techniques provide accurate measurements suitable for various types of plastic materials.

*** Please note: This description may not be accurate, please refer to the official documentation.

DIN EN ISO 1183-1:2024-03 history

• 2025 DIN EN ISO 1183-1:2025-09 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2025); German version EN ISO 1183-1:2025
• 2024 DIN EN ISO 1183-1:2024-03 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024); German and English version prEN ISO 1183-1:2024 / Note: Date of issue 2024-01-26*In...
• 2024 DIN EN ISO 1183-1:2024 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024); German and English version prEN ISO 1183-1:2024
• 2019 DIN EN ISO 1183-1:2019-09 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05); German version EN ISO 1183-1:2019
• 2019 DIN EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
• 2018 DIN EN ISO 1183-1:2018-04 Draft Document - Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO/DIS 1183-1:2018); German and English version prEN ISO 1183-1:2018
• 2018 DIN EN ISO 1183-1 E:2018 Draft Document - Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO/DIS 1183-1:2018); German and English version prEN ISO 1183-1:2018
• 2013 DIN EN ISO 1183-1:2013-04 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
• 2013 DIN EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012
• 2004 DIN EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004)
• 1970 DIN EN ISO 1183-1:1970 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)

Standard and Specification