DIN EN 60404-6:2004
Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20

Standard No.

DIN EN 60404-6:2004

Release Date

2004

Published By

German Institute for Standardization  DE  /  DIN

Status

Be replaced

Replace By

DIN EN 60404-6:2004-10

Latest

DIN EN 60404-6:2018-11

Scope

This part of IEC 60404 specifies methods for the measurement of a.c. magnetic properties of materials in the frequency range 20 Hz to 200 kHz other than electrical steels and soft ferrites. The materials covered by this part of IEC 60404 include those speciality alloys listed in IEC 60404-8-6, amorphous and nanocrystalline materials, pressed and sintered and metal injection moulded parts such as are listed in IEC 60404-8-9, cast parts and magnetically soft composite materials.#,,#

DIN EN 60404-6:2004 history

• 2018 DIN EN 60404-6:2018-11 Draft Document - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 68/595/FDIS:2018); German ...
• 2018 DIN EN 60404-6 E:2018 Draft Document - Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens (IEC 68/595/FDIS:2018); German ...
• 2009 DIN EN 60404-6 Berichtigung 1:2009 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20
• 2004 DIN EN 60404-6:2004-10 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003)
• 2004 DIN EN 60404-6:2004 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003); German version EN 60404-6:20

Standard and Specification