ASTM D8520/D8520M-23
Standard Specification for Iodotrifluoromethane (CF3I)

Standard No.

ASTM D8520/D8520M-23

Release Date

2023

Published By

American Society for Testing and Materials (ASTM)  US  /  ASTM

Status

Be replaced

Replace By

ASTM D8520/D8520M-23(2026)

Latest

ASTM D8520/D8520M-23(2026)

---

Introduction

Analysis of Standard Technical Framework

• Purity ≥ 99.6%: Verified by GC-MS, with a matching factor of 912
• Acidic matter ≤ 3.0 ppm: Determined by titration after extraction with IPA/toluene solution
• Fluoride/iodide ion ≤ 0.5 ppm: Ion chromatography is recommended (detection limit 0.02 ppm)

---

Special sampling requirements

Equipment Selection Case

A laboratory uses SwageLok™ 304L-HDF sampling cylinders (dual-valve design) with 0.25-inch stainless steel transfer tubes to complete liquefied gas sampling in an ice-water bath, improving sampling efficiency by 40%.

Special warnings in the standard:

1. TO-15 sampling canisters are prohibited (the upper pressure limit is only 275kPa)
2. The liquid sampling volume must not exceed 60% of the container
3. A mechanical ventilation system must be equipped (NOAEL is 0.2%)

---

Innovation in detection methods

The standard introduces a dual-track detection mechanism:

Technical Dimension	D8520/D8520M-23	Reference Standard D5632/D5632M	ISO 5789
Purity requirement	≥99.6%	≥99.8%	Not specified
Acidity limit (ppm)	3.0 (in HI)	1.0 (in HBr)	5.0

Test items	Traditional methods	Innovative methods
Halogen ions	Ion selective electrode method	Gradient elution ion chromatography
Purity verification	Area normalization method	NIST mass spectrum library matching (≥912)

---

Implementation recommendations

Laboratory configuration plan

• The GC-MS system needs to be equipped with a PLOT capillary column (inner diameter ≤0.53µm)
• The ion chromatograph should be equipped with an AS18 analytical column and an AERS suppressor
• Emergency eyewash stations and gas monitoring alarm devices should be installed in the sampling area

Compliance management

It is recommended to establish a three-level verification system: supplier self-inspection → third-party verification → annual unannounced inspection, with special attention to 49 CFR 178.42 Periodic inspection requirements for transport cylinders

ASTM D8520/D8520M-23 Referenced Document

• ASTM D5632/D5632M Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br)*， 2026-03-01 Update
• ISO 5789 Fluorinated hydrocarbons for industrial use; Determination of non-volatile residue

ASTM D8520/D8520M-23 history

• 2026 ASTM D8520/D8520M-23(2026) Standard Specification for Iodotrifluoromethane (CF3I)
• 2023 ASTM D8520/D8520M-23 Standard Specification for Iodotrifluoromethane (CF3I)

Standard and Specification