ASTM A950/A950M-24
Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

Standard No.

ASTM A950/A950M-24

Release Date

2024

Published By

American Society for Testing and Materials (ASTM)  US  /  ASTM

Latest

ASTM A950/A950M-24

Introduction

Analysis of the Standard's Core Content

ASTM A950/A950M-24 specifies the technical requirements for fusion-bonded epoxy coatings applied to structural steel H-piles and sheet piles using electrostatic spray, flocking, or fluidized bed processes. The latest revision primarily revised the coating thickness requirement (Section 8.1.1) and enhanced corrosion resistance in marine environments.

---

Comparison of key technical indicators

Test items	Requirement standards	Test method	Qualified indicators
Coating thickness	8.1.1	G12	Flat surface ≥450μm, corner ≥175μm
Chemical resistance	A1.3.1	G20	No blistering/peeling after 45 days
Impact strength	A1.3.2	G14	≥4.5J no damage
Cathode disbonding	A1.3.6	G8	Disbonding radius ≤6mm

---

Key points for application of standards

Surface preparation requirements

According to Clause 6.1, the surface of the steel pile must meet the near-white metal cleanliness of SSPC-SP10 and the anchor pattern depth must be 40-100μm. Common problems in actual projects include:

• Oxidation time after sandblasting is controlled within 3 hours (7.1)
• Uncoated areas must be reserved in the welding area (7.4)
• Repair materials must be compatible with the main coating (5.5)

Quality control process

The standard establishes a strict three-level inspection system:

1. Sampling every 4 hours to inspect thickness, continuity and flexibility (9.1)
2. Extended testing of adjacent batches for unqualified batches (10.2)
3. Full-size holiday inspection before final shipment (8.2.3)

---

Analysis of standard evolution

Compared with the 2023 version, the main changes in the 2024 version include:

• Clarifying that the coating can be thinned at the hinged part of the sheet pile ball
• Improve temperature control requirements for cathodic disbonding testing
• Add NACE TM0175 as a surface cleanliness comparison standard

Implementation Recommendations

For harsh environment applications such as offshore wind power foundations:

• Preferably use A690/A690M nickel-copper-phosphorus alloy steel substrates
• Increase salt spray test cycle to 2000 hours
• Use X-ray fluorescence to assist thickness detection

ASTM A950/A950M-24 Referenced Document

• ASTM A328/A328M Standard Specification for Steel Sheet Piling
• ASTM A36/A36M Standard Specification for Carbon Structural Steel
• ASTM A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling*， 2026-04-01 Update

ASTM A950/A950M-24 history

• 2024 ASTM A950/A950M-24 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• 2023 ASTM A950/A950M-11(2023) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• 2011 ASTM A950/A950M-11(2015) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• 2011 ASTM A950/A950M-11 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• 1999 ASTM A950/A950M-99(2007) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• 1999 ASTM A950/A950M-99(2003) Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
• 1999 ASTM A950/A950M-99 Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

Standard and Specification