IEC 60137:2017
Insulated bushings for alternating voltages above 1000 V

Standard No.

IEC 60137:2017

Release Date

2017

Published By

International Electrotechnical Commission (IEC)

Status

Be replaced 2018-05

Replace By

IEC 60137:2017/COR1:2018

Latest

IEC 60137:2017/COR1:2018

Replace

IEC 36A/187/FDIS:2017 IEC 60137:2008

Scope

This International Standard specifies the characteristics and tests for insulated bushings. This standard is applicable to bushings, as defined in Clause 3, intended for use in electrical apparatus, machinery, transformers, switchgear and installations for three-phase alternating current systems, having highest voltage for equipment above 1000 V and power frequencies of 15 Hz up to and including 60 Hz. Subject to special agreement between purchaser and supplier, this standard may be applied, in part or as a whole, to the following: bushings used in other than three-phase systems; bushings for high-voltage direct current systems; bushings for testing transformers; bushings for capacitors. Special requirements and tests for transformer bushings in this standard apply also to reactor bushings. This standard is applicable to bushings made and sold separately. Bushings which are a part of an apparatus and which cannot be tested according to this standard should be tested with the apparatus of which they form part.

IEC 60137:2017 Referenced Document

• CISPR 16-1-1-2015 Spécification des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques – Partie 1-1: Appareils de mesure des perturbations radioélectriques et de l’immunité aux perturbations radioélect
• CISPR 16-1-2-2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements
• CISPR 16-1-3 AMD 1-2016 AMENDMENT 1 Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-3: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Disturbance power (Edition 2.0)
• CISPR 16-1-3 CORR 1-2006 Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques – Partie 1-3: Appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélec
• CISPR 16-1-3-2004 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
• CISPR 16-1-4 AMD 1-2012 AMENDMENT 1 Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements (Edition 3.0)
• CISPR 16-1-4 AMD 2-2017 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements; Amendment 1
• CISPR 16-1-4 CORR 1-2010 Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements CORRIGENDUM 1 (Edition 3.0)
• CISPR 16-1-4 Edition 3.1-2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
• CISPR 16-1-4-2010 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
• CISPR 16-1-5 AMD 1-2016 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz; Amendment 1
• CISPR 16-1-5-2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz
• CISPR 16-1-6 AMD 1-2017 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration; Amendment 1
• CISPR 16-1-6-2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration
• CISPR 18-2-1986 Radio interference characteristics of overhead power lines and high-voltage equipment. Part 2: methods of measurement and procedure for determining limits
• IEC 60038:2009 IEC standard voltages
• IEC 60050-212:2010 International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases
• IEC GUIDE 109:2012 Environmental aspects - Inclusion in electrotechnical product standards

IEC 60137:2017 history

• 2018 IEC 60137:2017/COR1:2018 Insulated bushings for alternating voltages above 1 000 V (Edition 7.0)
• 0000 IEC 60137:2017 RLV
• 2008 IEC 60137:2008 Insulated bushings for alternating voltages above 1000 V
• 2003 IEC 60137:2003 Insulated bushings for alternating voltages above 1000 V
• 1970 IEC 60137:1995/COR1:1996 Corrigendum 1 - Insulating bushings for alternating voltages above 1000 V
• 1995 IEC 60137:1995 Insulated Bushings for Alternating Voltages Above 1000 V (Edition 4.0; Corrigendum-03/1996)
• 1984 IEC 60137:1984 Bushings for alternating voltages above 1 000 V
• 1970 IEC 60137:1973 Bushings for alternating voltages above 1000 V.
• 1970 IEC 60137:1962 Bushings for alternating voltages above 1 000 V