BS EN ISO 14122-3:2001+A1:2010
Safety of machinery. Permanent means of access to machinery. Part 3: Stairways, stepladders and guard-rails

Standard No.

BS EN ISO 14122-3:2001+A1:2010

Release Date

2001

Published By

British Standards Institution (BSI)

Status

Be replaced 2016-06

Replace By

BS EN ISO 14122-3:2016

Latest

BS EN ISO 14122-3:2016

Scope

EN ISO 14122 defines the general requirements for safe access to machines mentioned in EN 292-2. Part 1 of EN ISO 14122 gives advice about the correct choice of access means when the necessary access to the machine is not possible directly from the ground level or from a floor. This part of EN ISO 14122 applies to all machinery (stationary and mobile) where fixed means of access are necessary. This part of EN ISO 14122 applies to stairs, step ladders and guard-rails which are a part of a machine. This part of EN ISO 14122 may also apply to stairs, step ladders and guard-rails to that part of the building where the machine is installed, providing the main function of that part of the building is to provide a means of access to the machine. NOTE 1 This part of EN ISO 14122 may be used also for means of access which are outside the scope of this standard. In those cases the possible relevant national or other regulations should be taken into account. NOTE 2 For mobile machinery, alternative requirements can apply due to their dimensions and particular conditions of use. This part of EN ISO 14122 applies also to stairs, step ladders and guard-rails specific to the machine which are not permanently fixed to the machine and which may be removed or moved to the side for some operations of the machine (e.g. changing tools in a large press).

BS EN ISO 14122-3:2001+A1:2010 history

• 2016 BS EN ISO 14122-3:2016 Safety of machinery. Permanent means of access to machinery. Stairs, stepladders and guard-rails
• 2006 BS 4592-0:2006+A1:2012 Flooring,stair treads and handrails for industrial use.Part 0:Common design requirements and recommendations for installation
• 2006 BS 4592-0:2006 Industrial type flooring and stair treads - Common design requirements and recommendations for installation
• 1995 BS 4592-1:1995 Industrial type flooring, walkways and stair treads - Specification for open bar gratings
• 1992 BS 4592-4:1992 Industrial type flooring, walkways and stair treads - Specification for glass reinforced plastics open bar gratings
• 1987 BS 4592-3:1987 Industrial type flooring, walkways and stair treads - Specification for cold formed planks
• 1985 BS 5395-3:1985 Stairs, ladders and walkways - Code of practice for the design of industrial type stairs, permanent ladders and walkways