DIN EN 14566:2009 PDF

Scope: This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly. This European Standard covers the following product performance characteristics: reaction to fire and flexural strength to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this European Standard. This European Standard also covers the additional technical characteristics that are of importance for the use and acceptance of the products by the construction industry and the reference tests for these characteristics. This European Standard does not cover nails, screws and staples intended for use with materials other than plasterboard and the plasterboard based products referred to above and their associated system components.

DIN EN 14566:2009 Referenced Document

EN 10016 Non-Alloy Steel Rod for Drawing and/or Cold Rolling - Part 4: Specific Requirements for Rod for Special Applications
EN 10083 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels
EN 10084 Case hardening steels - Technical delivery conditions
EN 10230-1 Steel wire nails - Part 1: Loose nails for general applications
EN 10327 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions Supersedes EN 10142:2000, EN 10154:2002, EN 10214:1995, and EN 10215:1995
EN 14195 Metal framing components for gypsum board systems - Definitions@ requirements and test methods*， 2017-12-01 Update
EN 338 Structural timber - Strength classes*， 2016-04-01 Update
EN 520 Gypsum plasterboards - Definitions, requirements and test methods
EN ISO 12777-3:2002 Methods of test for pallet joints - Part 3: Determination of strength of pallet joints
EN ISO 6508-1 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)*， 2023-12-20 Update
EN ISO 9001:2000 Quality Management Systems - Requirements Supersedes EN ISO 9002:1994 and EN ISO 9003:1994; ISO 9001:2000*， 2024-04-19 Update
EN ISO 9227 Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/DAM 1:2023)

1970 DIN EN 14566 E:2014-11 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
2010 DIN 18182-2:2010 Accessories for use with gypsum plasterboards - Part 2: Dry wall screws, staples and nails
1987 DIN 18182-4:1987 Accessories for use with gypsum plasterboards; nails