DIN EN 12457-4:2003
Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
- Standard No.
- DIN EN 12457-4:2003
- Release Date
- 2003
- Published By
- German Institute for Standardization
- Latest
- DIN EN 12457-4:2003
- Replace
- DIN EN 12457-4:2000
- Scope
- This part of the European Standard specifies a compliance test providing information on leaching of granular wastes and sludges under the experimental conditions specified hereafter, and particularly a liquid to solid ratio of 10 l/kg dry matter. It applies to waste which has a particle size below 10 mm without or with limited size reduction. Note: In some cases, it could be useful to test the material with coarser particles up to 40 mm in diameter: This requires a larger amount for material and liquid.
DIN EN 12457-4:2003 history
- 2003 DIN EN 12457-4:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size r...
- 1970 DIN EN 12457-4 E:2000-02 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size r...
- 0000 DIN EN 12457-4:2000
