This standard specifies the classification and model preparation, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of bottled liquefied petroleum gas pressure regulators (hereinafter referred to as pressure regulators). This standard is applicable to household bottled liquefied petroleum gas pressure regulators with an inlet pressure of 0.03MPa ~ 1.56MPa, an outlet pressure of 2.8OkPa ± 0.5OkPa, a rated flow rate less than or equal to 2m/h, and an operating ambient temperature of -20 ℃ ~ 45 ℃. (hereinafter referred to as household pressure regulator); and the inlet pressure is 0.03MPa~1.56MPa, the outlet pressure is 2.8OkPa±0.5OkPa or 5.OOkPa±0.9OkPa, the rated flow is less than or equal to 3.6m/h, and the operating ambient temperature is - Non-household bottled liquefied petroleum gas pressure regulator between 20 ℃ and 45 ℃ (hereinafter referred to as non-household pressure regulator). All pressure values mentioned in this standard that are not marked refer to gauge pressure.
CJ 50-2008 Referenced Document
CJ/T 180-2003 Manually operated gas valves for use in house
GB/T 13611 Classification and basic characteristics of city gas*, 2018-03-15 Update
GB/T 13808 Wrought copper and copper alloys.Extruded rods and bars
GB/T 13818 Die casting zinc alloys*, 2009-04-01 Update
GB/T 15115 Die casting aluminum alloys*, 2009-04-01 Update
GB/T 1804 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 196 General purpose metric screw threads--Basic dimensions
GB/T 197 General purpose metric screw threads—Tolerances*, 2018-03-15 Update
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*, 2013-02-15 Update
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 3934 Specification of gauges for general purpose screw threads
GB/T 4423 Copper and copper alloy cold-drawn rod and bar*, 2020-09-29 Update
GB/T 7306.1 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
GB/T 7306.2 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2:Taper internal and external threads
CJ 50-2008 history
2008CJ/T 50-2008 Pressure regulators for liquefied petroleum gas cylinders
2001CJ 50-2001 Domestic pressure regulators for liquefied petroleum gas cylinders