This Part of this European Standard deals with the requirements for the design and manufacture of Guide
Bearings and Restraint Bearings.
Guide Bearings and Restraint Bearings are not intended to transmit vertical loads but they may be combined
in one unit with bearings in accordance. EN 1337-1:2000, Table 1.
NOTE 1 Guide Bearings and Restraint Bearings are shown in EN 1337-1:2000, Table 1, No. 8.1 and 8.2. For combined
bearings see EN 1337-1:2000, Table 1, bearing Nos. 1.2, 1.3, 1.6, 1.7, 1.8., 3.1, 4.1, 4.2, 4.3, 7.1, 7.3, and 7.4 with
restraints and Nos. 1.5, 1.7, 2.2, 3.3, 3.4, 5.2, 6.2 and 7.3 with guides.
NOTE 2 Examples of combined bearings are given in Annex B.
The minimum operating temperature depends on the materials' properties used at the required temperature
and the limitations given in the referenced parts of this European Standard.
NOTE 3 In certain circumstances the bearings described in this part of this European Standard may be required to
operate in a plane inclined to the horizontal. In such circumstances the terms "vertical" and "horizontal" should be
interpreted appropriately.
DIN EN 1337-8:2008 Referenced Document
EN 10025 Hot rolled products of non-alloy structural steels; technical delivery conditions
EN 10083-3 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels
EN 10088-2 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes*, 2014-10-01 Update
EN 10204 Metallic products - Types of inspection documents*, 2024-04-18 Update
EN 10340 Steel castings for structural uses Incorporating corrigendum: August 2008*, 2024-04-18 Update
EN 1337-1:2000 Structural Bearings - Part 1: General Design Rules
EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
EN 1337-5:2005 Structural bearings - Part 5: Pot bearings
EN 1337-9 Structural Bearings - Part 9: Protection
EN 1990 Eurocode - Basis of structural and geotechnical design*, 2023-03-22 Update
ISO 1083 Spheroidal graphite cast irons - Classification*, 2018-04-01 Update
ISO 3755 Cast carbon steels for general engineering purposes
ISO 4587 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 898 Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
DIN EN 1337-8:2008 history
2018DIN EN 1337-8:2018 Structural bearings - Part 8: Guide bearings and Restraint bearings; German and English version prEN 1337-8:2018
2008DIN EN 1337-8:2008-01 Structural bearings - Part 8: Guide Bearings and Restraint Bearings; German version EN 1337-8:2007 / Note: To be replaced by DIN EN 1337-8 (2018-02).
1970DIN EN 1337-8 E:2002-12 Structural bearings - Part 8: Guide Bearings and Restraint Bearings
0000 DIN EN 1337-8:2002
1994DIN V 4141-13:1994 Structural bearings - Restraints and side thrust bearings - Design and construction