SAE J2601/5-2024
High-Flow Prescriptive Fueling Protocols for Gaseous Hydrogen Powered Medium and Heavy-Duty Vehicles

Standard No.
SAE J2601/5-2024
Release Date
2024
Published By
Society of Automotive Engineers (SAE)
Status
Replace By
SAE J2601/5_202402
Latest
SAE J2601/5_202502
 
Scope
This TIR establishes high-flow fueling protocols, including their process limits for fueling of compressed gaseous hydrogen vehicles at peak flow rates from 60 to 300 g/s with compressed hydrogen storage system (CHSS) volume capacities between 248.6 and 7500 L which have been qualified to UN GTR #13. This document is initially being published as a TIR due to limited field testing of the fueling protocols. Once the fueling protocols have been field tested, the SAE Fuel Cell Standards Committee Interface Task Force intends to publish a revision to this document as an SAE Standard.

SAE J2601/5-2024 history

  • 0000 SAE J2601/5_202502
  • 2025 SAE J2601/5-2025 High-Flow Prescriptive Fueling Protocols for Gaseous Hydrogen Powered Medium and Heavy-Duty Vehicles
  • 0000 SAE J2601/5_202402
  • 2024 SAE J2601/5-2024 High-Flow Prescriptive Fueling Protocols for Gaseous Hydrogen Powered Medium and Heavy-Duty Vehicles

Standard and Specification

SAE AMS2759/11-2005 Stress Relief of Steel Parts SAE AS9132-2002 Data Matrix (2D) Coding Quality Requirements for Parts Marking SAE J2601-2010 Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles SAE J2012DA-2013 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions SAE J2601-2014 Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles SAE J1939-71-2020 Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document (See SAE CS 1939 for Companion Spreadsheet) SAE J2945/1-2016 On-Board System Requirements for V2V Safety Communications SAE J2601-2020 Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles SAE J2735-2016 Dedicated Short Range Communications (DSRC) Message Set Dictionary SAE AMS2759/11-2014 Stress Relief of Steel Parts SAE J514-201201 HYDRAULIC TUBE FITTINGS SAE AS9132B-2015 Data Matrix Quality Requirements for Parts Marking SAE J2601-2016 Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles SAE J442-202002 TEST STRIP, HOLDER AND GAGE FOR SHOT PEENING SAE AS4395-1991 Fitting End - Flared Tube Connection@ Design Standard SAE AMS2488-1977 ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SAE AS13003-201502 Measurement Systems Analysis Requirements for the Aero Engine Supply Chain SAE J514/1-2021 Automotive Tube Fittings SAE J2012DA-2016 Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions

SAE J2601/5-2024 -All Parts

SAE J2601-2-2014 Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles SAE J2601-3-2013 Fueling Protocol for Gaseous Hydrogen Powered Industrial Trucks SAE J2601-3-2013 Fueling Protocol for Gaseous Hydrogen Powered Industrial Trucks SAE J2601/2-2023 Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles SAE J2601/3-2022 Fueling Protocol for Gaseous Hydrogen Powered Industrial Trucks SAE J2601/4-2024 Ambient Temperature Variable and Fixed Orifice Fueling Protocols for Lightweight Gaseous Hydrogen Ground Vehicles SAE J2601/5-2025 High-Flow Prescriptive Fueling Protocols for Gaseous Hydrogen Powered Medium and Heavy-Duty Vehicles


Copyright ©2025 All Rights Reserved