SAE AS6999-2024
Standard Test Method for Measuring Impact Forces and Pressures of a Soft Projectile on an Inclined Rigid Flat Surface
- Standard No.
- SAE AS6999-2024
- Release Date
- 2024
- Published By
- Society of Automotive Engineers (SAE)
- Latest
- SAE AS6999-2024
- Scope
- This document describes methods for measuring dynamic forces, pressures, and projectile fragment distribution patterns during an impact between a soft or frangible projectile and a rigid flat inclined surface. It also describes the hardware, setup, and instrumentation required. In this test method, a soft body projectile impacts a rigid plate inclined at a specified angle to the direction of flight. The rigid target plate is backed up by a rigid structure, and sandwiched between the plate and the structure are force sensors to record reaction loads. Optionally, pressure transducers may be embedded in the target plate to record the pressure-time history of the impact. The target plate shall be sufficiently large so that the projectile flows across the surface without passing behind the plane of the plate impact surface, therefore capturing all of the impact load.
SAE AS6999-2024 history
- 2024 SAE AS6999-2024 Standard Test Method for Measuring Impact Forces and Pressures of a Soft Projectile on an Inclined Rigid Flat Surface
Topics on standards and specifications
Standard and Specification
SAE AS6999 Standard Test Method for Measuring Impact Forces and Pressures of a Soft Projectile on an Inclined Rigid Flat Surface
SAE AS6940-2021 Standard Test Method for Measuring Forces During Normal Impact of a Soft Projectile on a Rigid Flat Surface
JIS K 7211-2:2006 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
DIN EN ISO 6603-2:2002 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2
DS/EN ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test
GSO ISO 6603-2:2013 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
ASTM D8101/D8101M-24 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
ISO 6603-2:2000 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing
BS EN ISO 6603-2:2000 Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing