T/JSXX 012-2023
Application technical Standard of mould-fixed composite insulation board with wire mesh (English Version)

Standard No.: T/JSXX 012-2023
Language: Chinese, Available in English version
Release Date: 2023
Published By: Group Standards of the People's Republic of China
Latest: T/JSXX 012-2023

Scope: This standard is divided into 7 chapters. The main technical contents include: 1. General principles; 2. Terminology; 3. Basic provisions; 4. Performance requirements; 5. Design; 6. Construction; 7. Quality acceptance

T/JSXX 012-2023 history

2023 T/JSXX 012-2023 Application technical Standard of mould-fixed composite insulation board with wire mesh

Topics on standards and specifications

Combined steel formwork technology Intelligent combined steel formwork technology

Standard and Specification

PN B23110-1970 Minerl wool boards wire net reinfoced JG 158-2004 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods NS-EN 13950:2014 Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods GB 26540-2011 EPS board with metal network for exterior insulation and finish systems GSO IEC 60603-8:2014 Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 GOST R 57265-2016 Reinforcing mesh for masonry. Specifications KS C IEC 61109:2004 Composite insulators for a.c. overhead lines with a nominal voltage greater than 1 000 V-Definitions, test methods and acceptance criteria IS 9891 Pt.1-1981 Specification for edge connectors on printed wiring boards and insulating boards with 2.54 mm contact spacing Part I Test plan and requirements KS C IEC 61086-1:2008 Specification for coatings for loaded printed wire boards(conformal coatings)－Part 1：Definitions, classification and general requirements

Copyright ©2025 All Rights Reserved