API RP 752-2009
Management of Hazards Associated with Location of Process Plant Permanent Buildings (Third Edition)

Standard No.
API RP 752-2009
Release Date
2009
Published By
API - American Petroleum Institute
Status
Replace By
API RP 752-2024
Latest
API RP 752-2024
Replace
API RP 752:2003
Scope
"General This recommended practice (RP) provides guidance for managing the risk from explosions@ fires and toxic material releases to on-site personnel located in new and existing buildings intended for occupancy. This RP was developed for use at refineries@ petrochemical and chemical operations@ natural gas liquids extraction plants@ natural gas liquefaction plants@ and other onshore facilities covered by OSHA 29 CFR 1910.119 [1]. Buildings covered by this RP are rigid structures intended for permanent use in fixed locations. Tents@ fabric enclosures@ and other soft-sided structures are outside the scope of this document. Guiding Principles This RP is based on the following guiding principles: a) locate personnel away from process areas consistent with safe and effective operations; b) minimize the use of buildings intended for occupancy in close proximity to process areas; c) manage the occupancy of buildings in close proximity to process areas; d) design@ construct@ install@ modify@ and maintain buildings intended for occupancy to protect occupants against explosion@ fire@ and toxic material releases; e) manage the use of buildings intended for occupancy as an integral part of the design@ construction@ maintenance@ and operation of a facility. Relationship with API RP 753@ First Edition Buildings described in API RP 753@ Management of Hazards Associated with Location of Process Plant Portable Buildings@ First Edition@ June 2007@ as ""portable buildings specifically designed to resist significant blast loads"" and intended for permanent use in a fixed location are covered in this document (API RP 752). All other portable buildings are covered by API RP 753."

API RP 752-2009 history

  • 2024 API RP 752-2024 Management of Hazards Associated with Location of Process Plant Permanent Buildings
  • 0000 API RP 752:2009
  • 2003 API RP 752-2003 Management of Hazards Associated with Location of Process Plant Buildings (Second Edition)
  • 1995 API RP 752-1995 Management of Hazards Associated with Location of Process Plant Buildings (CMA Manager's Guide; First Edition; Errata - 1995)
Management of Hazards Associated with Location of Process Plant Permanent Buildings (Third Edition)



Copyright ©2024 All Rights Reserved